MAINTENANCE
63
355E MM306 (3–97)
MACHINE JACKING
You can jack up the machine for service at the
designated locations. Use a jack of adequate
capacity and good working condition. Always stop
the machine on a flat, level surface and block the
tires before jacking the machine up.
The front jacking locations are on the flat bottom
edge of the front of the machine frame next to the
front tires.
The rear jacking location is the middle flat bottom
edge of the rear bumper between the taillights.
FOR SAFETY: When servicing machine,
block machine tires before jacking
machine up.
FOR SAFETY: When servicing machine,
jack machine up at designated locations
only. Block machine up with jack
stands.
ELECTRIC MOTORS
The carbon brushes on the electric accessory
motor should be inspected after every 400 hours
of machine operation. The carbon brushes on the
electric propelling motor should be inspected after
every 800 hours of machine operation.
STORING MACHINE
Before storing the machine for an extended period
of time, the machine needs to be prepped to
lessen the chance of rust, sludge, and other
undesirable deposits from forming. Contact
TENNANT service personnel.
08029
08243
Summary of Contents for 355E
Page 1: ...355E MM306 Operator Manual ...
Page 72: ...INDEX 355E MM306 12 92 70 ...
