MAINTENANCE
45
355E MM306 (12–92)
FRONT WHEEL BEARINGS
Inspect the front wheel bearings for seal damage,
and repack and adjust every 400 hours of
operation. Use Lubriplate EMB grease
(TENNANT part no. 01433–1).
HYDRAULICS
HYDRAULIC FLUID RESERVOIR
The reservoir is located in battery compartment
above the battery.
Mounted on top of the reservoir is a filler cap with
a built-in breather and fluid level dipstick. Replace
the cap every 800 hours of operation.
Check the hydraulic fluid level at operating
temperature every 100 hours of operation. Make
sure the hopper is down when checking hydraulic
fluid level. The end of the dipstick is marked with
FULL and ADD levels to indicate the level of
hydraulic fluid in the reservoir.
Lubricate the filler cap gasket with a film of
hydraulic fluid before putting the cap back on the
reservoir.
ATTENTION! Do not overfill the
hydraulic fluid reservoir or operate the
machine with a low level of hydraulic
fluid in the reservoir. Damage to the
machine hydraulic system may result.
Drain and refill the hydraulic fluid reservoir with
new hydraulic fluid every 800 hours of operation.
08006
08241
08218
Summary of Contents for 355E
Page 1: ...355E MM306 Operator Manual ...
Page 72: ...INDEX 355E MM306 12 92 70 ...
