EN
200-Tb DM20017 (01-2012)
8
CHARGING INSTRUCTIONS
This unit can dispense approximately 1000 gallons (3785L)
of 5000-Sc solution per battery charge. The battery
level gauge will indicate when the unit requires charging.
Return the unit to the charging station when the gauge
indicates “E.”
Typical battery recharge time from 80% discharge is 8-10
hours. Charging can be done at anytime; the battery level
gauge does not have to be at “E” to connect the charger.
You may leave the battery connected to the charger for
extended periods of time without damage to the battery.
IMPORTANT: BATTERY MUST BE CHARGED FOR AT
LEAST 10 HOURS BEFORE FIRST USE.
WALL BRACKET INSTALLATION
A wall bracket for the battery charger is included with
this machine. The bracket is intended to protect the
charger from damage and loss.
This bracket should be mounted in a dry location near
a 12V GFI protected circuit in an area designated for
charging. Use the enclosed screws or other
fasteners appropriate for your wall type.
This bracket should be mounted within 70” (178 cm) of
the electrical outlet.
BATTERY CHARGING
1. To charge, bring unit to location of charger.
2. Loosen the two thumb screws on the battery box
that retain the cover.
3. Remove the battery box cover.
OPERATION
OPERATING INSTRUCTIONS
FOR SAFETY:
Always stop machine on a flat level surface and
engage the wheel lock before servicing the
machine.
Home
Find...
Go To..
