background image

EN

200-Tb DM20017 (01-2012)

2

This manual is furnished with each new 5000-Sc Cleaning

Solution Transport Unit.  It provides necessary operation  

and maintenance instructions.

Read this manual completely and 

understand the machine before 

operating or servicing it.

This machine will provide excellent service.  However, the 

best results will be obtained at minimum cost if:

• 

The machine is operated with reasonable care 

according to instructions provided

• 

The machine is maintained regularly per the 

machine maintenance instructions provided

• 

The machine is maintained with manufacturer 

supplied or equivalent parts. 

When ordering replacement parts use the Parts Lists 

section in this manual.  Before ordering parts or supplies, 

be sure to have your machine model number and serial 

number.  

WARRANTY STATEMENT:

Warranty is void if unit is used with any solution other than 

5000-Sc Cleaning Solution.  Please review the Commercial 

Warranty Policy on the back cover of this manual.

Orbio Technologies

701 North Lilac Drive

Minneapolis, MN 55440

Phone: (800) 553-8033

Phone: (763) 513-2850

www.orbiotechnologies.com

 and parts are subject to change without notice.

Original Instructions, copyright © 2012 Orbio Technologies from 

TENNANT COMPANY, Printed in US.  

All rights reserved. 

PROTECT THE ENVIRONMENT

Please dispose of packaging materials, old 

machine components, and hazardous 

 in 

an environmentally safe way according to local 

waste disposal regulations. 

Always remember to recycle.

OPERATION

The model and serial number of this machine are 

located on the back side of the unit.  Please note the 

model and serial number in the spaces provided below, 

and retain this book as a permanent record of your 

purchase.

Model Number:

Serial Number: 

Date Purchased:

Your new Cleaning Solution Transfer Unit is a product of 

high quality materials and superior workmanship.  We 

urge you to read these operating instructions carefully 

before you use the machine, in order to obtain the full 

performance and satisfaction it can give you.

CUSTOMER’S RECORD

Home

Find...

Go To..

Summary of Contents for 200-Tb















Reviews: