EN
IDENTIFYING THE MACHINE
The nameplate provides the following information:
►
Name of manufacturer.
►
Model
► Serial number.
►
Year of manufacture.
►
Power supply voltage (charging/supply values).
►
Current intensity (charging value).
►
Gross weight.
►
IP degree of protection.
►
Machine voltage (in average working conditions).
►
Machine power (in average operating conditions)
► Maximum negotiable gradient.
MACHINE PREPARATION:
Side brush assembly:
► Raise the front part of the machine, slide the brush on to the
shaft until it locks into place.
Handle assembly:
►
Release the handle locks as shown
►
Rotate handle into working height position
►
Return handle lock to the locking position
Connecting the Battery:
Remove the top cover to gain access to the battery using the 4 mm hex
wrench provided.
Locate the two Red/Black connectors.
Align the colors of the connectors.
Plug the two connector together.
UNPACKING:
Unpack the machine carefully avoiding movements that can cause
damage.
Once the machine is unpacked, check the condition of its parts. In
case the machine is broken in any of its parts, contact immediately our
authorized dealer.
For shipping and packaging purposes, some assembly is required. For
correct assembling instructions, see machine preparation
Packaging contents:
Machine
Side brush
Use and maintenance manual
Warranty card
Maintenance free type battery
4mm hex wrench
Central Brush T20 amp spare fuse
Actuator F2.5 amp spare fuse
Charger F2.5 amp spare fuse
Side Brush T6,3 amp spare fuse
Fan T5 amp spare fuse
Filter Shaker F2,5 amp spare fuse
Charger cord
In the case anything of the above should be missing, contact immediately
our authorized dealer.
Assure that all packaging material (plastics, carton, pallet, etc.) are
collected and stored away from children.
Model :
Vac :
W :
A :
Hz :
Ser.N :
Date :
IP :
Kg :
6
