TM-4100/TM-4100D
10
EMC
This meter was designed in accordance with EMC
Standards in force and its compatibility has been
tested in accordance with EN61326-1 (2006).
z
Ac / The pulse output wiring diagram:
6 Measurement Procedures and
Preparation
Precautions in Measurement of High-Rotation
Objects Detection of reflected light uses
modulated light is input for a fixed period of time
(about 0.2ms) or longer, a single pulse is detected.
For this reason, if the light pulse generated by the
passing reflective tape is less than 0.2ms
detection is not possible.
The range that can be detected with a 12mm
square target of reflective tape is indicated below.
※
Radius is the distance between the center of
the rotating object and the center of the tape.
