TM-4100/TM-4100D
12
For measurement of 30,000 r/min. or higher, use
the following.
Method :
Chapter Measurement Procedures
If the reflective tape cannot be attached within this
detection range, increase the area of the reflective
tape so that the generated pulse is 0.2ms to
higher.
6.1 Battery Loading:
Remove the battery cover on the back and put a
9V battery inside.
Battery replacement: When the symbol of “
”
appears on the LCD display, the battery should be
replaced with a new one.
The battery symbol will be displayed on the LCD,
this symbol “
” is a battery low indicator.
6.2 Power Button
：
z
Press
“
” button to power on.
z
Again Press “
” button to power off.
