TM-192/TM-192D
5
5. Measurement Procedures
z
Press “
” key turn on the meter, press “
”
key again to turn OFF the meter.
z
Press “
” key to select milli-gauss (mG) or
micro-tesla (µT) unit.
z
Position the front of the meter to measure the
magnetic waves.
z
Read the measured value. When manual range
mode is
selected, LCD will shown the
mark, The
display of “OL” on the highest position indicates
there is an overload on the reading. Press “
”
to select a higher range for measurement again.
z
The default value display
is triaxial
total magnetic
field reading. Press “
” key to toggle between
independent three single-axis magnetic field
readings and triaxial total magnetic field reading.
z
To lock and keep the reading displayed on the
LCD, press “
” or press “
” again to
unlock.
