TM-192/TM-192D
9
8. Continuity data logging setup
The data logging interval is the time between data
records. To begin data logging, set the logging
interval as per instructions below. To exit data
logging, set logging interval back to 0.
z
Press “
” key again to enter continuous data
logging interval setting mode (3.SET).
z
Press “
” or “
” key to select option to
adjust.
z
Press “
” or “
” key to change the value.
z
Press “
” key to store the setup, exit the
mode.
Interval range is 0 seconds (no data logging) to 99
hours, 99 minutes and 99 seconds.
