Digital Multimeter
Page <18>
20/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Measurement Operation (9)
I. Model UT60C Temperature Measurement
(see figure 10)
The temperature measurement range is
-40°C to 100°C
to measure temperature, connect the Meter as follows:
1. Insert the red temperature probe into the
µµ
A
µµ
A°C
terminal and the black temperature probe into the
COM
terminal.
2. Set the rotary switch to
°C
.
3. Place the temperature probe to the object being measured. The measured value shows on the display.
Note
••
The Meter automatically displays the temperature value inside the Meter when there is no temperature probe connection.
••
The included point contact temperature probe can only be used up to 250°C. For any measurement higher than that, the rod type
temperature probe must be used instead.
••
When temperature measurement has been completed, disconnect the connection between the testing leads and the circuit under
test, and remove the testing leads away from the input terminals of the Meter.
J. DC or AC Current Measurement
(see figure 11)
