Tenda W168R Page 5 User Manual Download

Page: 5 / 58

Wireless Broadband Router User’s Guide

2. Please use the delivery-attached

power supply to power the router.

3. Please connect your broadband line

provided by your ISP to the WAN

port of your router.

1.3 LED Indicators

LED Indicator

Description

POWER Always ON

Indicates it is powered on well.

SYS

Always ON

Indicates the system works well.

WAN Blinking

Indicates the Router’s WAN port is transmitting and

or receiving data packets.

Blinking

Indicates the wireless signal is OK.

WLAN

Off

Indicates wireless signal is turned off. (Press the

“Wireless ON/OFF” for one second to turn on/off

the wireless signal.)

Always ON

Indicates the Router connects with the computer

well.

LAN

(1/2/3/4)

Blinking

Indicates the Router’s LAN port is transmitting and

or receiving data packets.

Summary of Contents for W168R



























































Search results

Summary of Contents for W168R

Reviews:

Related manuals for W168R

Brands by name

Popular brands

Tenda W168R, User Manual

Search results

Summary of Contents for W168R

Reviews:

Related manuals for W168R

Brands by name

Popular brands