Wireless Broadband Router User’s Guide
1. MAC Address: To display the
MAC address of the router in the
LAN, its value can not be changed.
2. IP Address: To display the IP
address of the router in the LAN, the
factory default value is 192.168.0.1,
you can change it according to your
requirements.
For example, you can change the IP
address of the router as 192.168.3.1
as the figure beside.
Note:
If you change this IP
address into a new IP address, then
next time when you log in the router,
you must use this new IP address to
access the management interface of
the router. And all the default
gateway of the computer in the LAN
should be set as the value of this
new IP address.
Netmask: The default Sub-net Mask
of this router in the LAN is
255.255.255.0
WAN Setting
13
