Wireless Broadband Router User’s Guide
2.10 DHCP Server
DHCP Server setting
★
Tips: DHCP is the abbreviation
of Dynamic Host Configuration
Protocol which can assign IP
address, Subnet Mask, Default
Gateway of LAN Client on TCP/IP
automatically.
1. DHCP Server: The DHCP
function will go into effect if you
select “Enable” as the figure
beside.
2. IP Pool Starting Address: The
starting IP address which DHCP
Server automatically starts.
3. IP Pool Ending Address: The
ending IP address which DHCP
Server automatically ends.
The IP address that DHCP Server
assigns to the requested client
should be within the IP Pool. e.g.,
when you configure IP address pool
from 20 to 30, the IP Address
which can be obtained by the
clients would be between 20 and
30
