TE ADSL User’s manual
20
4.1 LAN Configuration
This section is for the configuration of LAN. You would set the related
parameters as the sign of your equipment in the network.
4.1.1 LAN Configuration
Get LAN Address:
On this option, the default setting is manual.
Please don’t try to change it, or you couldn’t log in. As a result, you
would not be able to configure normally and would not be able to have
access to the Internet. If changed by mistake, please reset the ADSL2+
Modem, to avoid any problem from happening.
LAN IP
: This option is to set IP address and gateway for the
ADSL2+Modem. The default factory setting is 192.168.1.1. The users
could modify the IP address of the modem in LAN. (Please modify the IP
address carefully, and avoid any mistakes. Or, you could not log in later. ) .
Subnet Mask:
This option is to set the subnet Mask for ADSL2+
Modem. The default factory setting is 255.255.255.0. When you need
to change subnet mask of the modem in the LAN, the users would
modify IP address for ADSL2+ Modem meanwhile.
Please refer to the figure below.
