TE ADSL User’s manual
7
Chapter Three Configuration for Access to the Internet
T is plug and play device, there are six bridge modes in the setting, you
can directly use external dial-up software or router dial-up to connect to Internet
without making any configuration. If you require to use built-in dial-up software of
T to connect to internet and also require to use its router function,
please configure according to the following steps:
In order to have configuration on T, you are required to enter into the
configuration Interface of the machine. Please operate as follows:
Step 1. Default IP Address of T is 192.168.1.1, please set your
computer in the same IP segment as T, Please set your NIC as “Auto
Obtain IP Address” or you can also set manually: IP address of your computer as
192.168.1.x (x is a number between 3 and 255), Subnet Mask of your computer as
255.255.255.0, Gateway of your computer as 192.168.1.1
Step 2.Then please open your IE explorer and enter 192.168.1.1 in the address bar.
Then the follow dialogue box would appear, in “User Name” please enter “admin”;
in “Password” please enter “admin”
Note: Please pay attention to the differences between capital letter and non capital
letter.
