N3 11N Wireless Broadband
Router User Manual
●
Start/End Port
: Enter the service port range provided by the mapped
host in internal network.
●
LAN IP
: The IP address of the computer which is used as a server in
LAN.
●
Protocol
: Includes TCP, UDP and Both. Select “Both” when you are not
sure about which protocol to use.
●
Enable
: Check the “Enable” option to activate the corresponding rule.
●
Delete
: Check the “Delete” option to delete the corresponding rule.
●
For example
:
You want to share some large files with your friends who are not in
your LAN; however it is not convenient to transfer such large files. Then,
you can set up your own PC as a FTP server and use the port range
forwarding feature to let your friends access these files. Provided that the
static IP address of the FTP server (Namely, your PC) is 192.168.0.10
and you want your friends to access this FTP server through default port
21 and TCP protocol, then you can follow the steps below for
configurations.
1. Enter 21 for both the start and end port in ID 1, or select "FTP"
from “Well-Known Service Port” and port 21 will be added automatically to
ID 1.
2. Enter 192.168.0.10 for the "IP Address", select "TCP" and then
select "Enable'.
3. The screenshot below displays the above settings.
49
