N3 11N Wireless Broadband
Router User Manual
for each data packet passing through it, and transfer it to the specified
destination. So, it’s essential for the router to select an optimal path, i.e.
routing algorithm. To complete this work, the router stores related data of
various transfer paths, i.e. establishing a routing table, for future route
selection.
9.2 Static Routing
You can use this section to set up router’s static routing feature.
●
Destination Network IP Address
: Enter a destination IP address or
subnet.
●
Subnet Mask
: Enter a Subnet Mask that corresponds to destination IP
address or subnet you entered.
●
Gateway
: Next-hop IP address.
NOTE
:
1. Gateway IP address must be on the same subnet with the router’s
LAN/WAN IP address.
2. If you want destination network to be a single host, then you must
enter an IP address thereof and 255.255.255.255 respectively in
Destination Network IP Address and Subnet Mask boxes.
3. If you want destination network to be a network, then you must
enter an IP address and a corresponding subnet mask value respectively
in Destination Network IP Address and Subnet Mask boxes. For example,
61
