TEN
Test Equipment Nederland B.V. (C) Version 3.0 February 2008
Pagina 7
Settings
During the smoke test the operator can change various settings or read the status of the smoke head. After
pressing the function key the operator can select one of the following menus:
RESET
Reset the max. opacity.
UNIT
Select opacity in % (percent) or m
-1
(light absorption coefficient).
Normally during a test always use %.
MODE
Select mode A (not filtered) or mode B (filtered). Normally during a test
always use mode B.
PROBE
Select sample probe 1 or 2.
Probe 1 = Ø 10 mm, exhaust diameter < 70 mm (passenger cars).
Probe 2 = Ø 27 mm, exhaust diameter >= 70 mm (large commercial vehicles).
DIVISION
Here you can set the division ratio for the RPM, for example 1,2,3,4 etc.
DISPLAY
Select what you want to display at the display at the right bottom, RPM or oil temperature.
STATUS
Menu to check the status of the EDA2 smoke head.
VERSION
Software version of the smoke head EDA2, for example 9.01
