Torsten
Adam,
tenHaaft
GmbH
1
Page
4
Additional
Information
This
document
describes
the
update
process
with
a
“Simple
Update
Card”.
There
are
four
versions
of
this
card:
Vision
II
,
Vision
III,
SunMoverSamy
V1
and
SunMoverSamyV2
.
On
the
cards
is
a
special
variant
of
the
EEP
file.
This
leaves
the
individual
user
settings
of
the
system
obtained.
It is possible that the SD-card causes a reset after insertion (depending on the
hardware version of the control unit). In this case the box initiates a reconnect and
continues normally.
The
check
of
a
card
can
take
longer
if
the
card
is
damaged
electrically
Please
be
patient!
As
long
as
the
programming
is
not
active,
the
card
can
be
removed
at
any
time.
It is also possible to send the update data via e-mail (self-extracting archive file that
will be unpacked on a card).
In this case, the used SD-card should be formatted with FAT32. This ensures that only
reasonable cards can be used (older SD cards or MMCs may work, but they are out of
specification. The same is true for SDHC cards).
