76
E
DiseqC troubleshooting table
Cause
remedial action
In menu option „DiseqC Monitor“ the
display does not change when the channel
is changed.
The DiseqC function is not activated at the receiver.
Activate the DiseqC function at the receiver. (Refer to
the manual of your receiver.)
Within the menu option „DiseqC monitor“,
the display shows incorrect satellite positi-
on numbers when the channel is changed
at the receiver.
In addition to standard DiseqC functions, some recei-
vers facilitate extended special functions. These must
not be activated.
In such cases it must be checked whether your recei-
ver is set to DiseqC 1.0, 1.1 or 1.2.
Also, there are DiseqC 2.xx signals that may be misin-
terpreted by the Sa® system.
Check the settings at the satellite receiver. Activate
the simplest DiseqC function. (Refer to the manual of
your satellite receiver.)
In the menu option „DiseqC monitor“, the
values are shown correctly, but the system
does not respond to channel changes at the
satellite receiver.
Is the DiseqC function activated at the Sa®
system? (DiseqC: On)
Does the control panel display show „Sat. operation“?
If another menu option is active, the DiseqC signals
are ignored!
In the menu option „DiseqC monitor“, the
values are shown correctly, and the antenna
moves when changing the channel, but the
TV screen remains blank.
The system aims the antenna at the wrong satellite.
1) Following the DiseqC confi guration, an automatic
search must be performed.
2) Are the positions in the menu option „SAT position“
correctly set? The assignment in the Sa®
system must be the same as in the receiver.
3) Are you located in an area in which the satellite
selected by the DiseqC function is not receivable?
Summary of Contents for samy solar plus
