Ten-Haaft samy solar plus, Operating Instructions Manual

Page: 66 / 128

66
E
Solar settings („SOLAR settings“)
Night mode:
Selection 0 – 2.
0: Your Sa® retracts at sunset (SS) and goes into rest mode. You will
need to restart the solar mode on the following day by pressing .
1: Your Sa® is retracted at sunset (SS) and waits until the following
sunrise (SR) to open again automatically.
2: Your Sa® remains open at sunset and automatically resumes
operation at sunrise, tracking the sun.
In modes 1 and 2, the time until the next sunrise is shown on the display while the
Sa® is waiting for sunrise. If you have selected a positive angle for sunri-
se (see „SR at“ on the next page) then the display will switch over to showing the
current position of the sun once it reaches 0°. Once this value reaches the selected
value your Sa® will automatically activate itself.
To cancel the automatic opening routine, press (the display is cleared). To
switch it back on again in solar mode, press .
Tracking:
Selection 1 – 15 (in °).
When the sun has moved by the specifi ed number of degrees, the system adjusts
the solar panel to track it. Choosing a smaller increment means that the SamYSo-
lar+® adjusts more frequently by smaller increments. Values in the range from 3° to
6° are most effi cient.