56
E
Safety information
Place the receiver in a place with suffi cient air circulation and away from
any heat sources. This will prevent heat accumulation inside the receiver
and ensures a longer lifecycle.
Do not place any items on the receiver – malfunctions, damage and even
self-ignition may occur if the ventilation openings are blocked.
To avoid the risk of fi re or damage to the device the receiver must never be exposed
to moisture or rain.
Should an item or liquid get into the housing, immediately disconnect the de-
vice from the power supply and have it checked by a qualifi ed professional before
further usage.
Should you ever notice an unusual smell or smoke, immediately disconnect the
device from the power supply and have it checked by a qualifi ed professional.
Switch off the receiver before connecting other devices.
The power supply line to the receiver must have a cross-section of 0,75
to 1,5 mm² and must be connected directly to the vehicle battery. Ensure
that the device is not connected to an electronic charge controller.
Keep a suffi cient distance to potential sources of interference such as mobile pho-
nes, electronic heater controllers, ignited components or radio devices when routing
the lines and positioning the components.
It is recommended that you ground your television set in the vehicle to
avoid interference on your television set or satellite receiver. Only connect
the freely accessible ground of your television set to the vehicle chassis.
Only use the wiring harnesses supplied or the extension wiring harnesses available
as accessories to connect the antenna unit.
Take care that there is no obstacle e. g. tree or traffi c sign, which might
disturb erecting the antenna.