USER MANUAL
UM-PDUB-181030 REV.A
Page 9 / 23
If you are going to program an AccessKey protected data logger using configuration file (.cfg format file) downloaded from online utility
(see
Configure Tempod with Online Utility
), please make sure enter correct
AccessKey for Verification
during selecting configuration
options, otherwise configuration will fail, LCD will show “E105” if AccessKey is incorrect or not included in configuration file (.cfg format
file) applied to AccessKey protected data logger,
LCD Screens after Configured
Manual Start –Start Delay
LCD displays “Stby” after configured. Logger was set to start option of start deley.
Manual Start – Temperature Conditions
LCD displays “Stby” and Temperature Unit after configured. Logger was set to start option
of Temperature Conditions.
Auto Start
LCD displays “Auto” and a Clock after configured, logger is waiting for automatic start on
pre-set time.
Manual Start & Stop
Press and hold
Start/Stop
button for
3
seconds to manually activate data logger and start recording, if logger was set to start option of Start
Delay, then recording would only begin after
Start Delay
time passes.
“go” flashes on LCD reminding you to keep current button action.
