USER MANUAL
UM-PDUB-181030 REV.A
Page 6 / 23
Configure Tempod with TempCentre Software
Connect Tempod data logger to USB port of PC, open TempCentre software, select
Configure Device
in tool bar, software would
automatically start searching and connecting devices, then user could start programming of this data logger.
See
TempCentre Data Management Software
about download, installation and operation of TempCentre software.
Configure Tempod with Online Utility
Connect data logger to USB port of PC, open Internet Browser, go to
, the online configuration utility for Tempod data
loggers, input and select configuration parameters you need, then download the configuration profile (.cfg format file) and save it into the
logger created removable storage device “TempSenDisk”, configuration is done.
Configuration Options
A unique 10 digits alphanumeric number automatically created for identifying each monitoring task.
LCD displays “USB” when logger connected to PC.
LCD displays “ConF” for configuration success when connection with PC remains. (Only applicable to non-
software configuration).
IMPORTANT
Please only apply configuration profile to the same product model on which configuration file is created
based, otherwise configuration fails and error code E102 appears on LCD.
Do not alter the configuration profile downloaded to avoid configuration error and damage to your data
logger.
Configuration profile contains time zone information, so please do not use this file in areas of different time
zones, or it will result in incorrect time base.
Configuration to data logger would erase all data recorded, so please make sure you have save the data before
configuration.
Do not remove data logger from PC before you are prompted of configuration success.
