18
19
E903 ASSEMBLY
STEP 1
STEP 3
STEP 2
STEP 4
HARDWARE CONTENTS:
HARDWARE CONTENTS:
HARDWARE CONTENTS:
HARDWARE CONTENTS:
Long Bolt (A)
M8×70 2 pcs
Long Bolt (A)
M8×70 2 pcs
Nut (B)
M8 2 pcs
Nut (B)
M8 2 pcs
Wavy Washer (C)
Φ8.5XΦ22XT1.5 2 pcs
Wavy Washer (C)
Φ8.5XΦ22XT1.5 4 pcs
Wavy Washer (C)
Φ8.5XΦ22XT1.5 2 pcs
A. Open hardware for step 1.
B. Attach the
Front Stabilizer Tube
to the
Main
Frame
using 2
Long Bolts (A)
, 2
Wavy
Washers (C)
and 2
Nuts (B).
A. Open hardware for step 3.
B. Carefully connect lower and upper console
cable.
C. Once all cables are connected, position
Console Mast
and assemble using 4
Hex
Screws (D)
& 4
Wave Washers (C)
.
A. Open hardware for step 2.
B. Attach the
Rear Stabilizer Tube
to the
Main
Frame
using 2
Long Bolts (A)
, 2
Wavy
Washers (C)
and 2
Nuts (B).
A. Open hardware for step 4.
B. Insert
Upper
Handlebar Axle
through
Console
Mast
pivot point. Then slide onto
Handlebar
Axle
1
Pivot Wavy Washer (H)
.
C. Slide into position left hand side
Upper
Handlebar
and fix in place using 1
Hex Screw
(E)
, 1
Spring Washer (G)
and 1
Pivot Flat
Washer (F)
.
D. Repeat steps
B-C
on the opposite side.
Hex Screw (E)
M8×20, 2 pcs
Pivot Flat (F)
Washer, 2 pcs
Spring Washer (G)
Φ8, 2 pcs
Pivot Wavy Washer (H)
Φ30xΦ13xT0.3, 2 pcs
Hex Screw (D)
M8x15 4 pcs
FRONT STABILIZER TUBE
MAIN FRAME
MAIN FRAME
REAR STABILIZER
TUBE
A
A
C
C
B
B
CONSOLE
MAST
UPPER HANDLEBAR
HANDLEBAR AXLE
CONSOLE
CABLE
C
D
H
F G
E
