14
15
ASSEMBLY STEp 5
ASSEMBLY STEp 6
HANDLEBAR
PEDAL ARM
TEFLON WASHERS (J)
BOLT (K)
FLAT WASHER (M)
SPRING WASHER (L)
NUT (N)
BRACKET
A Open
hardware for step 5
.
B Place
teflon washers (J)
on both sides of the
handlebar
. While holding
teflon washers
(J)
, slide
handlebar
into the
pedal arm
bracket.
C Align bottom of
handlebar
with the
bracket
on
pedal arm
.
D Secure the joint with 1
bolt (k)
, 1
flat washer
(m)
, 1
spring washer (l)
and 1
nut (n)
.
E Repeat on other side.
HARdWARE fOR STEp 5
:
TEFLON
WASHER (J)
28.4 mm
Qty: 4
BOLT (K)
82 mm
Qty: 2
FLAT WASHER (M)
16 mm
Qty: 2
NUT (N)
Qty: 2
SPRING WASHER (L)
13.5 mm
Qty: 2
CONSOLE
CONSOLE CABLE
PRE-ATTACHED
SCREWS
CONSOLE MAST
NOTE: there is no hardware bag for this step. All
hardware is pre-attached.
A
Attach the
console cable
to the open port
in the back of the
console
.
B
Carefully tuck the
console cable
into
the
console mast
before attaching
the
console
. Attach the
console
to
the
console mast
using the 4
pre-
attached screws
(the screws will have to
be removed from the console first).
YOU ARE FINISHED!
NOTE: Be careful not to pinch any
wires while attaching the console.
ce11-OM-rev2_4.indd 14-15
8/15/11 2:13 PM
