24 |
Rev 4.0 | http://www.temperaturealert.com/ | © 2011 Temperature@lert
Custom Email Message
Specify the text for an alert email using variables in the customized message.
These variables will be replaced with the respective values before an alert
email is sent.
The variables available for use are:
%ct% to be replaced with the current temperature;
%it% to replaced with the low temperature alarm setting; and
%ht% to be replaced by the high temperature alarm setting.
Degree Units
Choose between Celsius (C) and Fahrenheit (F) units (degrees) of measure.
SMTP (Simple Mail Transfer Protocol) Server
Designate your SMTP server (example: smtp.yourdomain.com).
SMTP (Simple Mail Transfer Protocol) Username
Designate the username used by your email provider.
SMTP (Simple Mail Transfer Protocol) Password
Designate the password used by your email provider.
SMTP Port
If necessary, designate a port other than the default provided.
Enable SSL/TLS
Check this box if your email server requires SSL or TLS encryption.
Test Mail Server
Click this button to test the connection to the specified mail server. A
successful test will result in an email being sent to the designated addresses
with the specified custom email message as well as all other current settings.
Actual alert emails will only display the custom email message and not the
other current settings displayed in the test message.
