14 |
Rev 4.0 | http://www.temperaturealert.com/ | © 2011 Temperature@lert
Hardware Installation
Connect the Temperature@lert USB sensor to an available USB port on your
computer. For placement away from your computer, you can use any
standard USB extension cable (not included). Windows will automatically find
the drivers and install them. If Windows is unable to locate the drivers
automatically, you can perform the driver installation manually:
When the “Add New Hardware Wizard” appears, do not connect with
Windows Update to search for software.
Instead, click “Next” and select “Install from a list or specific location.”
Then click “Next” again and select “Search for the best …” and check
“Include this location.”
Enter your computer's CD-ROM drive for that specified location and
click “Next”.
Repeat these same steps to install the second device driver.
