23 |
Rev 4.0 | http://www.temperaturealert.com/ | © 2011 Temperature@lert
High Temperature Alarm
Set the upper temperature limit so that alerts are triggered when a current
temperature reading rises above this specified number (degrees F).
Low Temperature Alarm
Set the lower temperature limit so that alerts are triggered when a current
temperature reading falls below this specified number (degrees F).
Email Alert Frequency
This setting determines how often Temperature@lert should email you during
an alarm condition. When the temperature exceeds one of your high or low
temperature alarm settings, Temperature@lert will send you an email
notification. Set the email alert frequency to 0 if you only wish to receive one
message when the temperature goes out of range and one message when the
temperature comes back into range. Setting the email alert frequency to a
number higher than 0, will ensure you receive an email every X minutes while
the temperature is out of range.
Status Email Frequency
This setting determines how often Temperature@lert will email you the
current temperature.
This email is sent even if the temperature is within your
acceptable range.
If this is set to 0, status emails will not be sent. If this is set
to any number greater than zero, Temperature@lert will use that number to
determine how often (in minutes) to send you the status email.
Mail To Address
Designate the email addresses where alerts are sent. Multiple addresses must
be delimited with a comma and no space.
Mail From Address
Designate the email address from which alerts will appear to have been sent.
Subject
Enter the subject to be used when Temperature@lert sends an email alert.
