6
Accessing the Guard over the phone
1) From another phone line call the Guard. The device will pick up after the programmed number of
rings (Default is 1).
2) To access all functions, enter the 4-digit "Full Access" PIN. (Factory default is
0000
). To access
only the "Acknowledge Only" functions, enter the 4-digit “Acknowledge Only” PIN (Factory default
is
1234
).
The "Acknowledge Only" functions are:
A) Confirming Alarm Conditions Remotely.
B) Checking Sensor Inputs Remotely.
3) You will hear the Main Menu options:
Programming Temperature Sensor Parameters
Each temperature sensor has four (4) programmable parameters as well as a programmable tem-
perature correction.
Sensor Identification Message.
The Sensor ID message will be played when the Guard is report-
ing the status of that Sensor. (This must be done over a phone line)
Sensor Low and High Temperature limits.
The low and high temperature limit values are pro-
grammed in degrees. When a sensor's temperature exceeds either the high or low limit for longer
than the programmed callout time delay, that sensor will be in alarm condition. These values can
also be programmed using the Data Capture Software (
quicker and easier
).
Sensor callout time delay.
A sensor's temperature must be out of limits for greater than the callout
delay time for the sensor to be in alarm condition. These values can also be programmed using the
Data Capture Software (
quicker and easier
).
Main Menu
Option
Function
1
Status
2
Set Limits
3
Program
0
Exit (Hang Up the phone)
#
Repeat Warning message
(if any input is in alarm condition)
NOT
SPOKEN MENU
ITEM
