tema AD630 Product Manual Download Page 36 | Manualshive

Page: 36 / 46

tema AD630 Product Manual Download Page 36

TEMA TELECOMUNICAZIONI

AD630VoIP SIP 25W / PoE Horn

MAS-AD630-REV01EN

Page 36 of 46

You will see the following screen:

The first part, "SIP SETTINGS", allows to register your device to a PBX or a SIP provider (necessary if you want to
reach  the  Doorphone  through  its  extension  number).  Marking  "Registration"  you  will  have  access to  the  account
setup registration (user name, password, etc.). If into the network a SIP PBX is not installed and want to reach the
Doorphone simply by its IP address, leave the check unmarked.

In the "ADVANCED SETTINGS" it is possible to configure any STUN Server (external to the private network) that
allows the application to reach the Doorphone through a firewall.

NOTE:  to  access  the  Doorphone  from  outside  the  corporate  network  (ie  from  the  Internet)  it  is  necessary  to
program  your  router  /  firewall  to  allow  incoming  connections  to  an  internal  device.  For  this  feature  contact  your
network  administrator  (each  router  /  firewall  has  its  own  programming  that  it  is  not  possible  to  generalize  in  this
manual).

Configuring Tema IP SIP terminals

It is possible to control with the application up to 4 systems simultaneously.
Also in the settings page is the menu to configure them:

Activating the slider of each Doorphone (or IP audio system), the fields to be configured will appear:

The  description appears in  the  displayed  image  and  is  useful  to  identify  the selected
Doorphone from time to time.

In  the  address  field  you  must  enter  the  IP  address  of  the  Doorphone.  It  is  used  to
show the camera or to make a call in Peer-to-Peer.

The  port  number  is  used  internally  by  the  program  for  the  communications,  must  be
8081.

The extension number is the number that must be dialed when from the  main screen
is selected  the call  key.  Obviously  it  makes  sense only  in  SIP  registered  to  the  PBX
Server. In Peer-to-Peer mode this field cannot be filled.

Finally in the field SN you must enter the serial number of the device. For safety reasons, it is needed to enable the
opening keys for relay 1 and relay 2).

«
...
34
35
36
37
38
...
»

Summary of Contents for AD630















































Reviews:

No comments