Tema Telecomunicazioni SipComStage AD639SR, Product Manual, Page: 16 / 31

Share

Page: 16 / 31

Tema Telecomunicazioni SipComStage AD639SR Product Manual Download Page 16

TEMA TELECOMUNICAZIONI

AD639SR VoIP SIP PoE Call Repeater

MAS-AD639SR-REV00

Pagina 16 di 31

9.4. SIP parameters

Once the network parameters have been set correctly, you must configure the connection with the VoIP SIP PBX:

•

SIP server address

: specify the IP address of the SIP PBX to which AD639SR should connect.

•

Port

: is the port number of the SIP PBX with which AD639SR must operate. Generally it is the 5060, but

some stations use a different port.

•

Domain

: enter the domain to which register the system.

•

Outbound proxy

: some PBXs require that the extension number to call is followed by the proxy address. In

most cases this field can be left empty.

•

Local port

: generally the 5060 port is used, but it is possible to specify a different number (i.e. for particular

routing tables).

•

Expiration

: indicates how many seconds the device should check the correct registration of the client.

•

User/password

: credentials for the registration of the extension (which obviously must have been already

created on the PBX).

•

Ringer volume

: it is possible to set the volume used to reproduce the sound of Night Ringer. It is also the

volume used to reproduce the prerecorded announcements.

•

Ringer type

: it is possible to choose up to 6 pre-programmed ring tones in the device plus a customizable

one (that coincides with the default one). It is possible to change it in the maintenance page, see par.9.9

•

Test Ring ON-Test Ring OFF

: buttons that activate the ringer for the purpose of testing the sound emitted.

•

Increasing volume:

with this option, the volume will start low and will increase, due to no response over

time, until reaching the maximum volume set in "Ringtone volume".

•

Relay 1-2 activation

: it is possible to choose whether the 2 relays are to be activated during the call and in

which mode.

«
...
14
15
16
17
18
...
»

Summary of Contents for SipComStage AD639SR
































Reviews:

No comments