TEMA TELECOMUNICAZIONI
AD639SR VoIP SIP PoE Call Repeater
MAS-AD639SR-REV00
Pagina 15 di 31
9.3. Network parameters
On this page it is possible to set the network parameters, such as IP address, netmask, etc.:
In case you choose the static network configuration, gateway and DNS are only needed if you want the device to
have the ability to access the Internet (for example to get the current date / time, in the example from the site
ntp1.inrim.it).
The changes to the network settings are taken over by the device until the next reboot. Once you have completed
the configuration steps so be sure to reboot the system and if necessary, change the network segment of your
computer so that it can connect to the new address.
•
Connection type
: indicate the type of connection, Dynamic (DHCP) or Static.
•
IP Address
: indicate the IP address you want to assign to AD639SR.
•
Subnet mask
: indicate the subnet mask you want to assign to AD639SR
•
Default gateway
: indicate the gateway that can allow AD639SR to connect to the internet.
•
Primary/Secondary DNS Server
: indicate the addresses of the two DNS servers to be used.
•
Time server
: indicate the address of the server you want to use to have the time synchronization of the
device.
•
Test address (ping)
: if entered, this address is used by the system to verify the correct functioning of the
network connection. It is advisable to enter the address of your pbx, first checking that it responds to ping
requests.
•
Device description
: text that will appear on the search mask of the Adam software.