Instructions for use and maintenance
Electric gearmotors 24-400 V AC
Page
3
of
16
1
INTRODUCTION
This manual contains information for use and maintenance of alternate current gearmotors
(hereinafter simply AC) with 24-400 V power supply, hereinafter referred to as "gearmotors".
Information about the electric motor can be found in the manual "Operating and maintenance
instructions" of the motor itself.
The content of this document reflects the requirements of Directives 768/2008/EC,
2014/30/EU, 2011/65/EU, 2012/19/EU and relevant legislation.
The manual is to be considered an integral part of the motor to which it is attached and must
therefore be kept throughout the life of the machine (it is recommended to keep it in a dry and
protected place).
The manufacturer reserves the right to make changes, without notice and without incurring any
penalty, without prejudice to the main technical characteristics and safety; for any other
information contact the nearest retailer.
WARNING
USE THE GEAR MOTOR ONLY AFTER READING THIS MANUAL AND THE
MANUAL OF THE ELECTRIC MOTOR
2
GENERAL WARNING
Before each operation, disconnect the equipment from the power grid. Has
dangerous rotating parts, remove the protection only by motor disconnected
from the network and with parts not in motion.
Attention the equipment can reach in the external surfaces in contact with the
operator, high temperatures. Handle only with cold motor.
Attention the motor has sharp parts that can cause injuries. Use special
protective gloves.
Attention the thin thickness of the plate bearing the electrical data can be sharp.
Beware the keyless motor drive shaft has sharp edges
WARNING:
-
The user is responsible for compliance with local safety, installation and use
regulations.
-
All transportation, installation, use, ordinary and extraordinary
maintenance of the motor must be performed exclusively by specialised and
competent operators.
-
Operator means the person or persons responsible for installing, operating,
adjusting, repairing and transporting the motor.
This manual contains the instructions that allow maintenance and regular use of the gearmotor
avoiding inconveniences that could damage its proper functioning.