3.
Connect and hand-tighten the
TNC Antennas
. Once they are installed, orient the antennas
so they point upward (vertical orientation). This is the typical desktop application.
4.
Connect the
Power Supply Adapter
to the unit’s Power Input and connect the
Power
Line Cord
to the Power Supply Adapter. Then, connect the Power Supply Adapter plug
into a power outlet.
Power
Input
Power Supply Adapter
Power Line Cord
(to power outlet)
TNC Antennas
Note
As marked on the back of the unit, the Antenna 1 terminal primarily handles voice and data
services.The Antenna 2 terminal provides radio diversity for optimized data speeds, as well as
GPS functionality for E911 and potential future location-based applications. Either TNC Antenna
may be used in either terminal.
IMPORTANT
E911 (Enhanced 911) Information –
Your unit is equipped with a GPS (Global Positioning
System) antenna for utilizing E911 emergency location services where available.When
you place an emergency 911 call from your device
(SX7T only)
, the GPS feature will
calculate and transmit your approximate location.
Always report your location to the 911 operator when placing an emergency call.
Some designated emergency call takers, known as Public Safety Answering Points
(PSAPs) may not be equipped to receive GPS location information from your SX7T.
Wi PATH
TM
SX7
3
User Guide
Getting Started
