SETUP
Install the SIM Card
The SX5 requires a Subscriber Identity Module (SIM) for normal operation. The service provider
supplies the SIM card, which carries the account information needed to operate the SX5. If you
don’t have a SIM card, contact your service provider. The SIM compartment is on the back of the
SX5
- see Figure 1
.
HINT:
Make sure your carrier disables SIM PIN1 or you will have to enter the PIN every time the
unit powers on. See the
SX5e User Features
section of this manual for more information.
1. Disconnect the power supply. The power supply must be disconnected whenever a SIM Card
is installed.
2. Remove the SIM compartment cover by removing the screw
- see Figures 1 and 2.
3. Open the SIM compartment holder.
4. Line up the SIM card with the arrow on the SIM card holder
- see Figure 2.
5. Gently insert the SIM card in the slot of the SIM card holder.
6. Close the SIM card holder.
NOTE:
Do not force the SIM card holder shut. Make sure the SIM card is aligned properly
with the directional arrow on the holder.
7. Reattach the SIM compartment cover with the screw.
Phonecell
®
SX5 GSM
1
User Manual
SIM
Compartment
Cover
SIM Card
Holder
SIM Card
Cover Screw
Figure 2
- Install the SIM Card.
Figure 1
- SIM compartment.
