10. Then click on the Connection tab. Set as shown below.
11. Click on the Advanced button. Set as shown.
12. Click on OK and Close to back out of each window. Your modem is now set up.
NOTE: When using the SX5 for PC fax operation, make sure the modem connection uses
software flow control. When using PC data, either hardware or software flow control can be
used, as long as the PC application (and modem) match the SX5's configuration. The SX5
defaults to hardware flow control. The following AT commands are used to change the SX5's
flow control.
Enable Software Flow Control: AT+IFC=1,1
Enable Hardware Flow Control: AT+IFC=2,2
Disable Flow Control:
AT+IFC=0,0
Phonecell
®
SX5 GSM
34
User Manual