Teltronics SEB NET-PATHm, Installation And Operation Manual

Page: 44 / 64

Operation
Page 3-12
PINGIP PINGIP IPAaddress Count Delay
Example:
PINGIP 172.16.3.24 3 30
Pings a specified IP address.
IPAddress = the IP address of a device on your
network
Count = number of ping requests to send
Delay = timeout to wait for each reply
PROMPT* PROMPT PromptText
Example:
PROMPT NET-PATH
Change the command line prompt.
PromptText = the text that displays on the remote
agent’s command line
PWD PWD Gets the current working directory. A current
directory is maintained for each drive.
RAW RAW SerialPortName Direction
Example:
RAW “Serial 2” OUT
The RAW command displays on the screen the
contents of the raw data buffer.
SerialPortName = name of NET-PATH serial
ports (1-8)
Direction = IN or OUT
RD RD Directory
Example:
RD \FLASH\Users\Jones
Removes an existing directory.
Directory = name of directory to remove
REBOOT REBOOT Forces the NET-PATH to reboot.
RELAY RELAY RelayName State
Example:
RELAY “Relay 2” ACTIVATE
Activates or deactivates a relay.
RelayName = actual device name of the relay as
defined on the Devices and Host tab in the
Remote Agent record
State = ACTIVATE, DEACTIVATE, or TOGGLE
RENAME RENAME OldFileName NewFileName
Example:
RENAME “OldName” “NewName”
Renames a file.
OldFileName = original file name
NewFileName = target file name
When entering strings, surrounding quotes are not
required. However, when a name contains spaces,
the quotes are required.
Table 3-1: NET-PATHm Commands