Teltronics BEM24 Manual Download Page 36

Page: 36 / 89

Headset Operation

To Answer a Call when Using a Headset:

Press the L

INE

button where the call is ringing.

To Place a Call when Using a Headset:

Press any idle line button, a DSS button or use on-hook dialing, then dial.

To Disconnect a Call when Using a Headset:

Press Cancel.

Changing Modes:

• To toggle between handset or headset mode to speaker, press S

PEAKER

EADSET

• To go to handset mode when using a headset, lift the handset.

• To go to headset mode when using a handset, replace the handset.

Note:

The S

PEAKER

EADSET

LED will be an amber color (looks almost red)

when you are in headset mode.

See your System Administrator for changes needed for headset use (e.g.
Extension Config - ‘Headset = Y’.)

This operation is possible when a headset is plugged in (on the bottom of a
teleset, next to the handset jack) and the handset is in its jack.

Headset operation as described above is only available on ClearCom
Revision 02 telesets.

Summary of Contents for BEM24


























































































Search results

Summary of Contents for BEM24

Reviews:

Related manuals for BEM24

Brands by name

Popular brands

Teltronics BEM24, Manual

Search results

Summary of Contents for BEM24

Reviews:

Related manuals for BEM24

Brands by name

Popular brands