ModemPCI G10
User Manual
If the device fails to work properly, only qualified personnel may repair this product. We
recommend to dismantle the device and forward it to repair center or to the manufacturer. The
modem does not contain any parts, which can be replaced.
In the installation, place and supply circuits should be tool up protective devices (bipolar
back up protection device) which will protect from short-circuit and wrong ground installation.
The power of connected device should satisfy power of release device. The interstice between
contacts should be no less than 3mm.
To turn off the modem, unplug the PC from the power supply.
After installation the drivers restart your PC.
SIM card is mandatory for setting up connection to the GSM network. However, the
manufacturer of this equipment does not supply the SIM card. The SIM card can be
purchased from your GSM (mobile) service provider!
For APN, user name and password please contact your GSM (mobile) service provider.
The PC must be powered off while inserting or taking out the SIM card. If the SIM card
will be inserted or taken out from the modem while the PC power is on – it may cause
damage to the modem or the SIM card. In this case, the modem will not be replaced or
repaired by the guarantee.
The modem can be unplugged from the PC only when PC is powered off.
2 USER‘S SERVICE
Then the device is not working or working bad the technical service of device can
perform only qualified personnel. The strongly recommended to hand the modem over to repairer
or manufacturer. No exchangeable parts inside of modem.
Do not mount or serve device during a thunderbolt.
4
