ModemPCI G10
User Manual
ATTENTION
All wireless devices for data transferring are susceptible to
interference, which could affect performance
Service personnel may install driver of this product. We
strongly recommend read this user manual before start
installation.
The device is not water-resistant. Keep it dry.
IMPORTANT NOTES!
It is mandatory to read the notes and manual carefully before starting to use the device.
1 FOR YOUR SAFETY
In this document you will be introduced how to use Modem PCI G10 device safely. We
suggest you to adhere to following recommendations to avoid any damage to person or property.
You have to be familiar with the safety requirements before starting to use the device!
Modem PCI G10 is used for data transfer by GSM network. The modem is designed to be
connected to a PC through PCI interface. By connecting the modem to a PC it is possible to
connect to the Internet using GSM data transfer channel. To avoid user injures that could be
caused by heat or electrical voltage it is important to follow safety requirements listed below.
Installation and technical support of the device can be
performed only by a service personnel or a person who has
enough knowledge about this device and safety requirements.
The PC to which the Modem PCI G10 device is to be connected must have a PCI slot.
Modem is supplied from +5V DC PCI interface.
The PC to which the device is connected shall comply with the
requirements of standard EN 60950-1. Modem PCI G10 modem
can be used on first (Personal Computer) safety class. It has to
be fixed to PC chassis by 3mm screw and spacer.
To avoid mechanical damage of the device, it is recommended to transport the device
packed in damage-proof pack.
Signal level of the modem depends on the environment in which it is working.
3
