Teltonika FMM130, Quick Manual

Page: 12 / 16

12
FMM130 | Wiki
Input voltage range 10 - 30 V DC with overvoltage protection
Back-up battery 170 mAh Li-Ion battery 3.7 V (0.63 Wh)
Power consumption
At 12V < 2.5 mA ( Ultra Deep Sleep )
At 12V < 5 mA ( Deep Sleep )
At 12V < 5.5 mA ( Online Deep Sleep )
At 12V < 18,5 mA ( GPS Sleep )
At 12V < 34 mA (nominal)
BLUETOOTH
Specification
4.0 + LE
Supported peripherals
Temperature and Humidity sensor , OBDII
dongle , Inateck Barcode Scanner, Universal
BLE sensors support
INTERFACE
Digital Inputs 3
Negative Inputs 1 1 (Digital Input 2)
Impulse Inputs 2 (Digital Input 1, Digital Input 2)
Digital Outputs 3
Analog Inputs 2
CAN Adapter inputs 1
1-Wire 1
GNSS antenna Internal High Gain
Cellular antenna Internal High Gain
USB 2.0 Micro-USB
LED indication 2 status LED lights
SIM Micro-SIM + eSIM
Memory 128MB internal flash memory
PHYSICAL SPECIFICATION
Dimensions 65 x 56 x 20,6 mm (L x W x H)
Weight 55 g
OPERATING ENVIRONMENT
Operating temperature (without
battery)
-40 °C to +85 °C
Storage temperature (without
battery)
-40 °C to +85 °C
Operating humidity 5% to 95% non-condensing
Ingress Protection Rating IP41
Battery charge temperature 0 °C to +45 °C
Battery discharge temperature -20 °C to +60 °C
Battery storage temperature
-20 °C to +45 °C for 1 month
-20 °C to +35 °C for 6 months
FEATURES
Sensors Accelerometer
Scenarios
Green Driving , Over Speeding detection ,
GNSS Fuel Counter , DOUT Control Via Call ,
Excessive Idling detection , Immobilizer ,
iButton Read Notification , Unplug detection ,
Towing detection , Crash detection , Auto
Geofence , Manual Geofence , Trip, Ground
Sense
Sleep modes
GPS Sleep , Online Deep Sleep , Deep Sleep ,
Ultra Deep Sleep
Configuration and firmware
update
FOTA Web , FOTA , Teltonika Configurator
(USB, Bluetooth), FMBT mobile application
(Configuration)
SMS Configuration, Events, DOUT control, Debug
GPRS commands Configuration, DOUT control, Debug
Time Synchronization GPS, NITZ, NTP
Fuel monitoring
LLS (Analog), LV-CAN200 , ALL-CAN300 , OBDII
dongle, CAN-CONTROL, OBDII dongle
Ignition detection
Digital Input 1, Accelerometer, External Power
Voltage, Engine RPM (CAN Adapters, OBDII
dongle)
Electrical characteristics