Teltonika FM2200, User Manual

Page: 29 / 45

29
getio Readout digital inputs and outputs Yes
readio # Readout input value according entered ID, # -
ID value
Yes
setdigout ## set digital outputs
0 – OFF, 1 – ON
DOUT1 DOUT2
Yes
getparam #
Readout parameter value according entered
ID.
# - ID value.
Yes
setparam # # Set parameter value according entered ID and
Value.
1.# - ID value.
2.# - New Parameter Value
Yes
flush #,#,#,#,#,#,# Initiates all data sending to specified target
server
1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
No
getstatus
Response details Description
Data Link Indicate module connection to server at the moment: 0 – Not
connected, 1 – connected
GPRS Indicate if GPRS is available at the moment
Phone Voice Call status: 0 – ready, 1 – unavailable, 2 – unknown, 3 –
ringing, 4 – call in progress, 5 – asleep
SIM SIM Status: 0-ready, 1-pin, 2-puk, 3-pin2, 4-puk2
OP Connected to GSM Operator: numerical id of operator
Bat Battery charge level [0-5]
Signal GSM Signal Quality [0-5]
Service
NewSMS Indicate if new message received
Roaming 0 – Home Network, 1 – roaming
SMSFull SMS storage is full? 0 – ok, 1 – SMS storage full
Example: Data Link: 0 GPRS: 1 Phone: 0 SIM: 0 OP: 24602 Bat: 4 Signal: 5 Service: 1 NewSMS: 0 Roaming:
0 SMSFull: 0