40
Minimum
value
Maximum
value
Recommende
d value
Goes with (depends on) parameters
Value type
-90.0
90.0
-
GeoFence border width (ID=20)
GeoFence Zone #1 Configuration
Parameter (ID=30)
Float
GeoFence x2 (ID=33)
Parameter has two meanings dependent on zone shape. If shape is rectangular, then ID=33 is
right upper corner X coordinate in WGS. If shape is circle, then ID=33 is radius of circle with center
of ID=31 and ID=32.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on) parameters
Value type
-180.0
180.0
-
GeoFence border width (ID=20)
GeoFence Zone #1 Configuration
Parameter (ID=30)
Float
GeoFence y2 (ID=34)
If shape is rectangular, then ID=34 is right upper corner Y coordinate in WGS. If shape circle,
ID=34 is not used.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on) parameters
Value type
-90.0
90.0
-
GeoFence border width (ID=20)
GeoFence Zone #1 Configuration
Parameter (ID=30)
Float
All the rest zones
Other 5 GeoFence zones parameters have the same logic as shown in GeoFence Zone #1.
GeoFence Zone
Number
GeoFence Zone‟s
parameters
2
40 – 44
3
50 – 54
4
60 – 64
5
70 – 74
8.6
System parameters
Sleep mode (ID=000)
Parameter enables or disables sleep mode for FM4100: 0 – disabled, 1 – enabled.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on) parameters
Value type
0
1
-
-
Enum
GPS Enable (ID=10)
Parameter enables or disables GPS receiver. When GPS is disabled value is 0, and 1 when
enabled.
Summary of Contents for FM2200
Page 1: ...FM2200 User Manual V1 3...
