28
After device is switched on, you have to wait 3 minutes for device to startup. Only then it is
possible to download records. If the memory is fully filled, the records reading may take several
minutes. After reading records, all records are deleted from the device memory. Data records are
stored in a binary file on your PC. You can upload these records from file to TAVL server and
access all the data from TAVL.
ATTENTION! New functionality is available only with FM1100M version. Check
for correct version on your FM1100M sticker as it is shown below. In the upper
right corner there has to be M symbol indicating FM1100M version.
TAVL client application lets user to use the
following features:
•
Import data file saved from the
device to the TAVL;
•
Preview track of the imported data;
•
Generate reports of the imported
data.
More details on how to use TAVL
application please refer to “TAVL3 application
user manual v1.4” documentation or its later
versions.
FM1100M version can be still used as a
standard FM1100. It can be configured to acquire and send data to server. It will be possible to
store up to 100’000 data records if GSM is not available at the moment. It will send data later
when GPRS is available again. Note that FM1100M can have memory full of records. In such a
case it will start deleting oldest records in order to save new ones. Sending all the data records to
server may take some time. Sending 100’000 records for FM1100M may take for about 21 hour
(exact time may differ depending on GPRS/server load).
5.8
Two SIM cards*
6
2SIM version is able to operate with two SIM cards, with two GSM operators.
Check for correct version on your FM1100M sticker as it is shown below (Figure 21). In the upper
right corner has to be M and 2S symbols indicating 2SIM version.
6
Functionality available only with 2SIM version!
Figure 20 FM1100M sticker
