21
view driven total distance
3
. Event will be
generated (included into send records) only
when trip
starts and finishes.
Note: Scenarios and Trip features are activated only if Ignition (Configured to
be detected by Power Voltage, Ignition or Accelerometer) is turned on.
Geofencing
Geofencing is another feature which is highly customizable and can detect wherever car
enters or leaves customized areas. More about Geofencing can be read in 5.15 Geofencing
settings chapter.
Auto Geofencing feature if enabled is activated automatically by turning off car Ignition
(Configured to be detected by Power Voltage, Ignition or Accelerometer). Next time before
driving user has to disable Auto Geofencing by turning on car ignition (Configured to be detected
by Power Voltage, Ignition or Accelerometer). In case of theft car leaves Auto Geofencing zone
without authorization FM1010 device automatically sends high priority record to AVL application.
5.5
CONFIGURATION
Installing FM1010 for configuration:
Plug in device to OBD-II power adapter (accessory is optional).
Connect output wires to DC power source (10-16V).
Plug in USB mini cable.
Open configurator and configure your device.
Figure 10 inserting FM1010 to OBD-II connector
3
Continuous odometer – total driven distance, works only in TRIP mode. Continues distance is counted only
for ONE trip. If trip is finnished (stop point is detected), odometer resets to 0 (zero). Next trip will start counting
from the begining.
