Teltonika FM1010, User Manual

Page: 20 / 70

20
5.3 Virtual odometer
Virtual odometer is used to calculate traveled distance in FM1010 as a separate I/O
element. When FM1010 detects movement, it starts counting distance using GNSS signal: every
second it checks current location and calculates distance between current and previous point. It
keeps adding these intervals until it is time to make a record, then FM1010 records its location
and adds odometer value, which is equal to the sum of all distances, measured every second.
When record is made, odometer resets to zero and distance calculation starts all over again.
Virtual odometer as an I/O element can be also used with Trip feature, read chapters and
for more details.
5.4 Features
Using available features can greatly increase FM1010 usability options.

Scenarios
Two scenarios are available on FM1010 device.
Green Driving
or/and Over Speeding;
Green Driving Scenario. Helps to prevent and inspect driver about harsh driving. Scenario
continuously monitors: accelerating force, braking force and cornering angles.
To save GPRS traffic Green Driving event will be generated (included into sent records)
only when FM1010 measured values are higher than those set in configuration, without
additional I/O settings.
To prevent generating false events, harsh acceleration and harsh braking is monitored only
when following conditions are fulfilled:

Ignition (Configured to be detected by Power Voltage, Ignition or Accelerometer) is
turned on.

Vehicle speed is equal or higher than 10km/h.
Harsh cornering is monitored only when following conditions are fulfilled:

Ignition (Configured to be detected by Power Voltage, Ignition or Accelerometer) is
turned on.

Vehicle speed is equal or higher than 30km/h.
Note: Green Driving Scenario is a factor on various cars and various drivers
testing phase and can be subject to changes. Teltonika is constantly working
on improvement of the functionality of the devices, and strongly recommends
using the latest version of the firmware.
Over Speeding Scenario . Helps to prevent from exceeding fixed speed and inspects driver if
needed.

Trip
Trip customizable feature enables user extended monitoring of performed trips (from
engine start at present location to engine stop at arrived location), log their start and stop points,