DSL link status
Log in to gateway and go to advanced > Broadband > DSL link status
Maximum Line rate is the maximum speed the link is capable of and is limited by the physical
characteristics of the line.
Line Rate is the actual speed data is transferred. The line rate can not be faster than maximum Line rate
but can be less due due to speed limitations on your connection. Example Maximum line rate might be 98
Mbps but if yo are on NBN 50 plan Line rate will be 62 Mbps and if Maximum line rate is 36 Mbps and
you are on NBN 50 plan Line rate would be 36 Mbps
Line Attenuation is the amount the signal get decreased due to the attenuation of the line. There are
several value as the attenuation increases with frequency. The greater the attenuation the lower the
maximum speed.
Noise Margin is the margin between the received signal and the signal to noise ratio at which the signal
can no longer be accurately decoded. Normally 6d but can be higher if noise profile has been
implemented.
