Telstra 13450 User Manual Download Page 64 | Manualshive

Page: 64 / 75

background image

64

HELP

My telephone doesn’t work at all.

Make sure the power cord is securely plugged in.
If there are backup batteries in the telephone base, make sure they are
correctly installed.
Make sure you plug the battery connector securely into the cordless handset.

Make sure you plug the telephone line cord securely and irmly into the

telephone base and the telephone wall jack.

Charge the battery in the cordless handset for at least 11 hours. For optimum
daily performance, return the cordless handset to the handset charger when
not in use.
Charge the pendant for at least 3 hours. For optimum daily performance,
return the pendant to the pendant charger when not in use (For pendant model
only).
Make sure you turn the pendant on before use.
If the battery is completely depleted, charge the handset or the pendant for at
least 30 minutes before use.
Reset the telephone base. Unplug the electrical power. Take out the back-up
batteries if necessary. Wait for approximately 15 seconds, then plug it back in.
Allow up to one minute for the cordless handset, pendant and telephone base
to reset.
You may need to purchase a new handset battery.

I cannot get a dial tone.

Try all the suggestions above.
Move the cordless handset or the pendant closer to the telephone base. You
may have moved out of range.
If the previous suggestions do not work, disconnect the telephone base from

the telephone jack and connect to a different phone. If there is no dial tone on

that phone either, the problem is in your wiring or telephone service. Contact
your telephone service provider.
Your line cord may be defective. Try installing a new line cord.

I cannot dial out.

Try all the suggestions above.
Make sure you have a dial tone before dialing. The cordless handset or the

pendant may take a second or two to ind the telephone base and produce a

dial tone. This is normal. Wait an extra second before dialing.
Eliminate any background noise. Noise from a television, radio or other
appliances might cause the phone to not dial out properly. If you cannot

eliminate the background noise, irst try muting the cordless handset before

•
•

•
•

•

•

•
•

•

•

•
•

•

•

•
•

•

«
...
62
63
64
65
66
...
»

Summary of Contents for 13450












































































Reviews:

No comments

Related manuals for 13450

Brand: Panasonic Pages: 252

KX-TH112 - Cordless Phone - Operation

Brand: Panasonic Pages: 10

EXI8560 - EXI 8560 Cordless Phone

Brand: Uniden Pages: 12

EXI4560 - EXI 4560 Cordless Phone

Brand: Uniden Pages: 48

EXI4246 - EXI 4246 Cordless Phone

Brand: Uniden Pages: 48

EXAI5680 - EXAI 5680 Cordless Phone

Brand: Uniden Pages: 64

EXAI3248 Series

Brand: Uniden Pages: 68

Brand: Uniden Pages: 48

Brand: Uniden Pages: 52

DXI 4286-2 Series

Brand: Uniden Pages: 48

DXI 4286-2 Series

Brand: Uniden Pages: 52

Brand: Uniden Pages: 29

Brand: Uniden Pages: 12

Brand: Uniden Pages: 16

EXP 7900 Series

Brand: Uniden Pages: 12

EXP 7900 Series

Brand: Uniden Pages: 12

DXAI5588-3 Series

Brand: Uniden Pages: 72

DECT2080 Series

Brand: Uniden Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands