19
Lift the handset and place it aside. Hold down the switch hook to the telephone
base, then slide the handset tab upwards to remove it from the slot. Rotate the
handset tab 180 degrees. Push the handset tab down into the groove so it clicks
into position.
Press the tabs of the wall mount bracket as the arrows indicated below to
release it from the telephone base. Unplug the telephone line cord from the
telephone line jack on the bottom of the telephone base. Unplug the power
adaptor cord from the power jack on the bottom of the telephone base. Remove
the telephone line cord and power adaptor cord through the wall mount bracket.
Rotate the wall mount bracket and lock it into tabletop position as indicated.
Plug one end of the telephone line cord into the telephone line jack on the
bottom of the telephone base. Plug the small end of the power adaptor into the
power jack on the bottom of the telephone base. Route the telephone line cord
and the power adaptor cord through the slots accordingly.
3.
4.
5.
Route through
the slot
Unplug
Unplug
Remove the telephone line cord and
power adaptor cord through the
wall mount bracket.
